News
新闻资讯分类
What do you need to know about infrared radiator installation?
- Categories:IR Lamp Technologies & News
- Author:
- Origin:
- Time of issue:2022-09-26
- Views:0
(Summary description)Due to the material and structure of the infrared radiator, the quartz tube and the inner heating wire may be broken when subjected to large vibrations.
Fast response IR radiator
Fast response IR radiator
What do you need to know about infrared radiator installation?
(Summary description)Due to the material and structure of the infrared radiator, the quartz tube and the inner heating wire may be broken when subjected to large vibrations.
- Categories:IR Lamp Technologies & News
- Author:
- Origin:
- Time of issue:2022-09-26
- Views:0
1. Due to the material and structure of the infrared radiator, the quartz tube and the inner heating wire may be broken when subjected to large vibrations. Therefore, please avoid large vibration, drop and extrusion when moving and stacking the infrared heat radiator.
2. Avoid holding the root of one end of the infrared heat radiator with one hand and trying to pick up the IR heat radiator, because the end of the quartz tube (especially the pressure seal) is easily broken by bending force.
3. When conditions permit, try to wear soft gauze gloves to take and install the infrared heat radiator, which can not only prevent oil and sweat from contaminating the infrared heat radiator and affect the heating effect, but also in case the infrared heat radiator is broken during the installation process, it can be installed. Avoid scratching the operator's hands at the splinter.
4. When installing the ir radiator, please avoid rigidly fixing the tube body or the ceramic head of the infrared heat radiator, because although the thermal expansion of the infrared radiation infrared heat radiator is small, the equipment for installing the infrared heat radiator may be deformed or twisted during the heating process, and the rigidity Fixing will result in damage to the infrared heat radiator.
5. The two ends of the infrared heat radiator (the place where the quartz tube is sealed) should be placed in the low temperature area as far as possible (for the vacuum infrared tube, the expansion coefficients of the quartz and molybdenum sheets are different, and the pressure plate may be broken at high temperature, so as not to exceed 220°C is appropriate) to prolong the service life of the infrared heat radiator.
Scan the QR code to read on your phone
WRITE A MESSAGE TO US
Infrared Lamp Quartz Infrared Emitter Quartz Infrared Heater Industrial Drying Infrared Solution Gold Reflector Twin Tube IR Radiator
Copyright © 2025 Nanjing E-DEN Lighting Technology Co., Ltd. ALL RIGHTS RESERVEED