PRODUCTS
Contact Us
400V 6400W 1900mm IR Heater Lamp For Intermac Laminated Glass Cutting Machine
Category:
Glass Cutting and Processing
Fast Medium Wave Twin Emitter IR Lamp
| Product name: | Quartz Infrared Heater Lamp |
| Part number: | EDIRTA40-64-3315G2 |
| Rated voltage: | 400V |
| Rated power: | 6400W |
| Tube diameter: | 33×15mm |
| Reflector: | Gold |
| Burning postion: | Horizontal and Vertical |
| Application: | Laminated Glass Cutting Table |
Twin tube is a better stable design for short wave, fast response medium wave, carbon medium wave and medium wave infrared heating lamps with high radiation density and high power intensity. The twin tube quartz sizes are 23×11mm and 33×15mm. The heating filament of infrared lamps can be designed by tungsten, Ni-Cr alloy and carbon fiber. In order to better convey and focus on the heated material all the IR radiation emitted from the lamps, the special gold reflector or ceramic white reflector will be coated and fixed directly on the quartz surface
The cutting trajectory is very small and along the cutting trajectory to install infrared heating lamps, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through IR heating lamp.
For A type twin tube IR lamp, there is only one quartz tunnel is heated and we can paint reflect gold layer with different angles or different radiant sizes for small sizes industrial heating purpose, such as laminated glass cutting.
EDEN IR quality customized twin tube infrared lamps can be repalced your original heating lamp, such as Heraeus lamp, LISEC cutting lamp, Bavelloni cutting lamp, Bottero IR lamp, Intermac glass cut lamp, Macotec heating lamp and etc...We have successfully produced long IR lamps with some specifications as below:
400V 6400W 1900mm
400V 6400W 1920mm
400V 9450W 3450mm
600V 8300W 3450mm
600V 7800W 3520mm
600V 8000W 3855mm
500V 5900W 3870mm
700V 10300W 3920mm
600V 7800W 4720mm
700V 9800W 4720mm
600V 16000W 6120mm
Related Products
Message
Key words:
