PRODUCTS

400V 8000W 3450MM Twin Tube Infrared Lamp Medium Wave Quartz Heating For Laminated Glass Cutting

400V 8000W 3450MM Twin Tube Infrared Lamp Medium Wave Quartz Fast Heating IR Lamp For Laminated Glass Cutting Fast response medium wave infrared lamp can be switched on/off the same as short wave lamps in a short time, and the range of IR radiation wave is 1.4-2.0μm. The especial fast medium wave can heat the surface and thin layers quickly. Fast medium wave lamps can be made in all lengths up to 6 meter long. The twin tube designed lamps are stable and its high power density lamp can transfer high energy to the long material. Along the cutting trajectory to install infrared heating lamps, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through IR heating lamp. Twin tube fast response medium wave infrared heating lamp can dry ink and coatings on the surface of objects in a short time. The heating filaments can be desinged and work in 1200～1800℃, so the FMW IR lamp are widely used for fast heating application which needs heating temperature from 50～500℃. 1. Accurate（±1 ℃）IR heating temperature control 2. 1~2 seconds fast response time to full power IR heating energy 3. Small installation space, flexible in horizontal or vertical working position

Category:

Glass Cutting and Processing

Tel

E-mail:

Fast response medium wave infrared lamp can be switched on/off the same as short wave lamps in a short time, and the range of IR radiation wave is 1.4-2.0μm. The especial fast medium wave can heat the surface and thin layers quickly. Fast medium wave lamps can be made in all lengths up to 6 meter long. The twin tube designed lamps are stable and its high power density lamp can transfer high energy to the long material.

Along the cutting trajectory to install infrared heating lamps, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through IR heating lamp.

Twin tube fast response medium wave infrared heating lamp can dry ink and coatings on the surface of objects in a short time. The heating filaments can be desinged and work in 1200～1800℃, so the FMW IR lamp are widely used for fast heating application which needs heating temperature from 50～500℃.

1. Accurate（±1 ℃）IR heating temperature control

2. 1~2 seconds fast response time to full power IR heating energy
3. Small installation space, flexible in horizontal or vertical working position