PRODUCTS

Laminated Glass Cutting 600V 8000W 3850MM Twin Tube Fast Response Medium Wave Heating Infrared Emitter

Twin Tube Gold Reflector Infrared Emitter For Tempered Glass Cutting We cannot cut tempered glass directly, otherwise it will be broken. But if we heat up the temperature on glass by IR heat emitter, then we can cut the heated glass easier. Along the cutting trajectory to install infrared twin tube emitters, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through Infrared emitter. Twin tube fast response medium wave infrared emitters can be controlled and adjusted the output power by PLC or SCR regulator automatically, so we can have accurate（±1 ℃）IR heating temperature in industry process. The heating filaments can be desinged and work in 1200～1800℃ with 1~2 seconds fast response time, so the FMW IR emitter are widely used for fast heating application which needs heating temperature from 50～500℃. Because of needing small installation space and flexible working position, our infrared quartz emitters are popular for industrial customers to repalce air heating and other high energy consumption electric heating elements, or customers prefer a combination heating solutions which includes circle hot air heating with fast efficient IR heatings. EDEN IR quality customized twin tube infrared lamps can be repalced your original heating lamp, such as Heraeus lamp, LISEC cutting lamp, Bavelloni cutting lamp, Bottero IR lamp, Intermac glass cut lamp, Macotec heating lamp and etc...We have successfully produced long IR lamps with some specifications as below: 400V 6400W 1900mm 400V 6400W 1920mm 400V 9450W 3450mm 600V 8300W 3450mm 600V 7800W 3520mm 600V 8000W 3855mm 500V 5900W 3870mm 700V 10300W 3920mm 600V 7800W 4720mm 700V 9800W 4720mm 600V 16000W 6120mm Product name: Quartz Infrared Radiator/ Infrared Emitter Part number: EDIRTA60-80-3850/3750-3315G2 Rated voltage: 600V Rated power: 8000W Total length: 3850±2mm Heated length: 3750mm Tube diameter: 33×15mm Reflector: Gold Burning postion: Horizontal and Vertical Replacement: SMAG 8000/3755 G Application: Laminated Glass Cutting Table

Category:

Glass Cutting and Processing

Tel

E-mail:

Twin Tube Gold Reflector Infrared Emitter For Laminated Glass Cutting

Product name:	Quartz Infrared Twin Tube IR Emitter
Part number:	EDIRTA60-80-3850/3750-3315G2
Rated voltage:	600V
Rated power:	8000W
Total length:	3850±2mm
Heated length:	3750mm
Tube diameter:	33×15mm
Reflector:	Gold
Burning postion:	Horizontal and Vertical
Replacement:	SMAG 8000/3755 G
Application:	Automatic Laminated Glass Cutting Machine

We cannot cut laminated glass directly, otherwise it will be broken. But if we heat up the temperature on glass by IR heat emitter, then we can cut the heated glass easier.

Along the cutting trajectory to install infrared twin tube emitters, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through Infrared emitter.

Twin tube fast response medium wave infrared emitters can be controlled and adjusted the output power by PLC or SCR regulator automatically, so we can have accurate（±1 ℃）IR heating temperature in industry process. The heating filaments can be desinged and work in 1200～1800℃ with 1~2 seconds fast response time, so the FMW IR emitter are widely used for fast heating application which needs heating temperature from 50～500℃.

Because of needing small installation space and flexible working position, our infrared quartz emitters are popular for industrial customers to repalce air heating and other high energy consumption electric heating elements, or customers prefer a combination heating solutions which includes circle hot air heating with fast efficient IR heatings.

EDEN IR quality customized twin tube infrared lamps can be repalced your original heating lamp, such as Heraeus lamp, LISEC cutting lamp, Bavelloni cutting lamp, Bottero IR lamp, Intermac glass cut lamp, Macotec heating lamp and etc...We have successfully produced long IR lamps with some specifications as below:

400V 6400W 1900mm

400V 6400W 1920mm

400V 9450W 3450mm

600V 8300W 3450mm

600V 7800W 3520mm

600V 8000W 3855mm

500V 5900W 3870mm

700V 10300W 3920mm

600V 7800W 4720mm

700V 9800W 4720mm

600V 16000W 6120mm