PRODUCTS

Quartz Heating Infrared Heater Lamp High Efficiency Energy Saving Quartz Infrared Lamp

During the cooling process, injection molded parts may generate internal stress due to uneven shrinkage, resulting in deformation or cracking. Local annealing eliminates stress and improves dimensional stability by heating specific areas. Traditional annealing uses an oven for overall heating, but it is inefficient and may affect the performance of other parts of the part. Parameter Infrared Heating Traditional Methods (Oven/Mechanical) Speed Seconds (1–30 s) Minutes to hours Energy Efficiency Low (directional heating) High (bulk heating/mechanical energy) Precision Millimeter-level positioning, controlled Dependent on manual/mold accuracy Part Suitability Complex geometries, thin-walled parts Simple geometries, thick-walled parts Environmental Impact No dust, low noise Dust from wear, noise pollution Quartz infrared heater with Infrared lamp selection: Shortwave infrared lamp (1.0-1.4μm) suitable for rapid and depth heating, fast medium-wave infrared lamp (wavelength 1.4-2μm) suitable for fast and uniform surface heating of materials. Shortwave infrared lamp (1.0-1.4μm) suitable for rapid and depth heating Short Wave Single Tube Infrared Lamp is made of round single quartz tube. The heating filament is tungsten alloy which can resist up to 2600°C. We have 10mm, 11mm, 12mm, 14mm, 15mm and 19mm quartz single tube. The total length of single tube IR lamp can be up to 2.5 meter. Shortwave Twin Tube Quartz IR Lamp is made of 23×11mm or 33×15mm quartz double tube. The heating filament is tungsten alloy material. Twin tube shortwave infrared heating lamp can be designed with high heating power, the range of radiation wave is 1.0-1.4μm, it is particularly suited for fast response heating processes. This short wave infrared radiation penetrates more deeply into materials, as they can obtain infrared radiation full-efficiency within seconds. Fast medium-wave infrared lamp (wavelength 1.4-2μm) suitable for fast and uniform surface Fast response medium wave infrared lamp can be switched on/off the same as short wave lamps in a short time, and the range of IR radiation wave is 1.4-2.0μm. The especial fast medium wave can heat the surface and thin layers quickly, like drying ink and coatings on the surface of objects in a short time. The heating filaments can be desinged and work in 1200～1800℃, so the FMW IR lamp are widely used for fast heating application which needs heating temperature from 50～500℃. We have single tubes with sizes of 10mm, 11mm, 12mm, 14mm, 15mm, 19mm. Twin tube fast response medium wave infrared heating lamp can be controlled and adjusted the output power by PLC or SCR regulator automatically, so we can have accurate（±1 ℃）IR heating temperature in industry process. The heating filaments can be desinged and work in 1200～1800℃ with 1~2 seconds fast response time, so the FMW IR lamp are widely used for fast heating application which needs heating temperature from 50～500℃.

Category:

Plastic Rubber Metal Wood Infrared Drying

Tel

E-mail:

Parameter	Infrared Heating	Traditional Methods (Oven/Mechanical)
Speed	Seconds (1–30 s)	Minutes to hours
Energy Efficiency	Low (directional heating)	High (bulk heating/mechanical energy)
Precision	Millimeter-level positioning, controlled	Dependent on manual/mold accuracy
Part Suitability	Complex geometries, thin-walled parts	Simple geometries, thick-walled parts
Environmental Impact	No dust, low noise	Dust from wear, noise pollution

Quartz infrared heater with Infrared lamp selection: Shortwave infrared lamp (1.0-1.4μm) suitable for rapid and depth heating, fast medium-wave infrared lamp (wavelength 1.4-2μm) suitable for fast and uniform surface heating of materials.

Shortwave infrared lamp (1.0-1.4μm) suitable for rapid and depth heating

Short Wave Single Tube Infrared Lamp is made of round single quartz tube. The heating filament is tungsten alloy which can resist up to 2600°C. We have 10mm, 11mm, 12mm, 14mm, 15mm and 19mm quartz single tube. The total length of single tube IR lamp can be up to 2.5 meter.

Shortwave Twin Tube Quartz IR Lamp is made of 23×11mm or 33×15mm quartz double tube. The heating filament is tungsten alloy material. Twin tube shortwave infrared heating lamp can be designed with high heating power, the range of radiation wave is 1.0-1.4μm, it is particularly suited for fast response heating processes. This short wave infrared radiation penetrates more deeply into materials, as they can obtain infrared radiation full-efficiency within seconds.

Fast medium-wave infrared lamp (wavelength 1.4-2μm) suitable for fast and uniform surface

Fast response medium wave infrared lamp can be switched on/off the same as short wave lamps in a short time, and the range of IR radiation wave is 1.4-2.0μm. The especial fast medium wave can heat the surface and thin layers quickly, like drying ink and coatings on the surface of objects in a short time. The heating filaments can be desinged and work in 1200～1800℃, so the FMW IR lamp are widely used for fast heating application which needs heating temperature from 50～500℃. We have single tubes with sizes of 10mm, 11mm, 12mm, 14mm, 15mm, 19mm.

Twin tube fast response medium wave infrared heating lamp can be controlled and adjusted the output power by PLC or SCR regulator automatically, so we can have accurate（±1 ℃）IR heating temperature in industry process. The heating filaments can be desinged and work in 1200～1800℃ with 1~2 seconds fast response time, so the FMW IR lamp are widely used for fast heating application which needs heating temperature from 50～500℃.