PRODUCTS

Twin Tube IR Lamp For Laminated Glass Cutting Table

Twin tube is a better stable design for short wave, fast response medium wave, carbon medium wave and medium wave infrared heating lamps with high radiation density and high power intensity. The twin tube quartz sizes are 23×11mm and 33×15mm. The heating filament of infrared lamps can be designed by tungsten, Ni-Cr alloy and carbon fiber. In order to better convey and focus on the heated material all the IR radiation emitted from the lamps, the special gold reflector or ceramic white reflector will be coated and fixed directly on the quartz surface. According to the configuration of different heating filament design and ending cables, twin tube infrared lamp can be produced as the following common filament configuration. 1: Cables can be one side connection or two sides connection 2: Different heating length designed for partial heating purpose 3: Length is up to 6 meter long and widely used in industrial heating process, such as glass cutting, plastics forming or lamination, auto painting and etc.. For A type twin tube IR lamp, there is only one quartz tunnel is heated and we can paint reflect gold layer with different angles or different radiant sizes for small sizes industrial heating purpose, such as laminated glass cutting. The cutting trajectory is very small and along the cutting trajectory to install infrared heating lamps, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through IR heating lamp. EDEN quality customized twin tube infrared lamps can be repalced your original heating lamp, such as Heraeus lamp, LISEC lamp, or other brands. We have successfully produced long IR lamps with some specifications as below: 500V 5900W 3870mm 600V 7800W 3520mm 600V 7800W 4720mm 600V 8000W 3855mm 700V 10300W 3920mm

Category:

Glass Cutting and Processing

Tel

E-mail:

According to the configuration of different heating filament design and ending cables, twin tube infrared lamp can be produced as the following common filament configuration.

1: Cables can be one side connection or two sides connection

2: Different heating length designed for partial heating purpose

3: Length is up to 6 meter long and widely used in industrial heating process, such as glass cutting, plastics forming or lamination, auto painting and etc..

For A type twin tube IR lamp, there is only one quartz tunnel is heated and we can paint reflect gold layer with different angles or different radiant sizes for small sizes industrial heating purpose, such as laminated glass cutting.

The cutting trajectory is very small and along the cutting trajectory to install infrared heating lamps, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through IR heating lamp.

EDEN IR quality customized twin tube infrared lamps can be repalced your original heating lamp, such as Heraeus lamp, LISEC lamp, or other brands. We have successfully produced long IR lamps with some specifications as below:

500V 5900W 3870mm

600V 7800W 3520mm

600V 7800W 4720mm

600V 8000W 3855mm

700V 10300W 3920mm