PRODUCTS
Contact Us
560V 7400W Twin Tube Gold Reflector Infrared Medium Wave Quartz Emitter Replacement For BOTTERO Laminated Glass Cutting Table
Category:
Glass Cutting and Processing
| Product name: | Quartz Infrared Medium Wave Emitter |
| Part number: | EDIRTA56-74-2520 |
| Rated voltage: | 560V |
| Rated power: | 7400W |
| Total length: | 2520mm |
| Tube diameter: | 33×15mm |
| Reflector: | Gold |
| Burning postion: | Horizontal or Vertical |
| Heating application: | Laminated Glass Cutting |
Fast response medium wave infrared emitter can be switched on/off the same as short wave infrared emitters in a short time, and the range of IR radiation wave is 1.4-2.0μm. The especial fast medium wave can heat the surface and thin layers quickly, like drying ink and coatings on the surface of objects in a short time. The heating filaments can be desinged and work in 1200～1800℃, so the infrared medium wave emitters are widely used for fast heating application such as laminated glass cutting.
Along the cutting trajectory, the infrared emitter heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through IR heating emitter.
Industrial Infrared Drying-Glass Cutting IR Lamp
E-DEN quality customized twin tube infrared lamps can be repalced your original heating lamp, such as Heraeus lamp or other brands. We have successfully produced long IR lamps with some specifications as below for LISEC, INTERMAC, BOTTERO, BAVELLONI, MACOTEC, TUROMAS Glass Cutting Tables.
400V 6400W 1920mm
400V 6500W 1980mm
400V 6750W 2920mm
400V 9450W 3450mm
560V 7400W 2520mm
600V 8300W 3450mm
600V 7800W 3520mm
600V 8000W 3855mm
500V 5900W 3870mm
700V 10300W 3920mm
600V 7800W 4720mm
700V 9800W 4720mm
600V 16000W 6120mm
Related Products
Message
Key words:
