PRODUCTS

undefined
+
  • undefined

600V 7900W Fast Medium Wave Infrared Twin Tube Emitter Quartz Heater For TUROMAS Glass Cutting Table


600V 7900W Fast Medium Wave Infrared Twin Tube Emitter Quartz Heater For TUROMAS Glass Cutting Table

Category:

Glass Cutting and Processing

Product name:Twin Tube IR Lamp Quartz IR Emitter
Part number:EDIRTA60-79-2480
Rated voltage:600V
Rated power:7900W
Total length:2480mm
Tube diameter:33×15mm
Reflector:Gold
Burning postion:Horizontal or Vertical
Application:TUROMAS Laminated Glass Cutting Table LAM 505SX

 

 

 

 

 

Fast response medium wave infrared radiator lamp can be switched on within 1~2 seconds. The especial fast medium wave can heat the surface and thin layers quickly. The heating filaments can be desinged and work during 1200~1800℃, so the FMW IR lamp are widely used for fast heating application which needs heating temperature from 50~500℃.

 

Along the cutting trajectory to install infrared heating lamps, the infrared heating will increase the temperature of glass rapidly, and the heat is passed to the surrounding area in the form of thermal conductivity, forming a thermal influence area along the infrared heating trajectory, especially the temperature on the cutting trajectory is going to be the highest. The fast heating raise the temperature and it causes the glass expansion to have compression stress. The upper and lower surface of the glass produces tensile stress, due to the temperature decreasing by air convection. At this time, the expansion and contraction of the glass material are the largest, and glass will be broken easier and this is the glass cutting way through IR heating lamp.

 

We are quartz infrared heater lamps manufacturer and we can design radiator infrared lamps with solutions for you. We proudce IR heaters up to 6 meters long and custom heating power for you. EDEN IR quality customized twin tube infrared lamps can be repalced your original heating lamp, such as Heraeus lamp, LISEC cutting lamp, Bavelloni cutting lamp, Bottero IR lamp, Intermac glass cut lamp, Macotec heating lamp and etc...

 

400V 6400W 1900mm

400V 9450W 3450mm

600V 8300W 3450mm

600V 7800W 3520mm

600V 8000W 3855mm

500V 5900W 3870mm

700V 10300W 3920mm

600V 7800W 4720mm

700V 9800W 4720mm

600V 16000W 6120mm

 

And if you have other ideas for your heating projects, please feel free to contact with us. 

 

 

Message

* Note: Please be sure to fill in the information accurately and keep communication open. We will contact you as soon as possible!

Submit

Key words: